Updated November 2026
Building diy solar screens for windows lets you cut glare and heat before sunlight ever reaches the glass, and you can do it with basic hand tools. This guide walks through choosing a screen material, measuring each window, building a removable frame and mounting it so it stays put in wind. Plan on a weekend for a few standard windows.
Choose the Right Screen Material
Most DIY builders use woven polyester or vinyl-coated fiberglass mesh sold as solar shade cloth. The key number is openness factor, which is the percentage of the fabric that is open space. A 10 to 20 percent openness factor blocks most glare and heat while still letting you see out clearly. Denser weaves block more light but reduce the view.
Check that the mesh is UV-stable and rated for outdoor use. Cheap indoor fabrics fade and sag within a season.
Measure and Cut the Frame
Measure the inside dimensions of each window opening at three points: top, middle and bottom width, and left, center and right height. Use the smallest number in each direction and subtract 1/8 inch so the frame drops in without binding. Record the figures for each window separately, since older homes often have openings that are not square.
Cut your frame stock to length, typically 1×2 or 1×3 lumber or aluminum tubing. Join corners with corner brackets or pocket screws, and check each frame with a diagonal measurement. Equal diagonals mean a square frame.
Tools and supplies checklist
- Shade cloth or mesh with a 10 to 20 percent openness factor
- Lumber or aluminum frame stock
- Miter saw or hacksaw, tape measure and speed square
- Staple gun with heavy-duty staples or a tacking strip
- Pocket hole jig or corner brackets
- Exterior screws and wood glue or sealant
- Hook-and-eye hardware or spring clips for mounting
Stretch and Attach the Mesh
Lay the frame on a flat surface and center the mesh with at least 2 inches of overlap on every side. Pull it taut, starting at the middle of one side and working outward, then staple it every 3 to 4 inches. Tight mesh resists flapping in wind and holds its shape longer. Trim the excess once the frame is fully covered.
Mount the Screens Securely
Mount screens on the outside of the window so the mesh shades the glass before heat builds up. Use exterior hooks or spring clips at the top corners and bottom edges so each screen can be removed for cleaning or winter storage. Check that the frame sits flush and does not block the window’s opening or latch. A screen that rattles in a light breeze needs one more fastener.
Tips and Common Mistakes
- Do not measure only once. Re-check every opening before cutting.
- Avoid mesh that is too dense, which can make rooms feel dark.
- Leave a small gap for airflow at the top so the screen does not trap heat.
- Label each frame with its window location so the fit stays correct.
- Use exterior-grade fasteners to prevent rust streaks on siding.
Recommended gear
- Solar shade cloth: A UV-stable mesh with a defined openness factor gives consistent shade and long life. View on Amazon
- Corner brackets and pocket hole jig: Keeps frame corners square without complicated joinery. View on Amazon
- Heavy-duty staple gun: Holds taut mesh firmly against the frame edges. View on Amazon
FAQ
Do DIY solar window screens block the view outside?
A 10 to 20 percent openness mesh still lets you see clearly during the day, though the view will look slightly dimmer. Denser fabrics give more shade but reduce visibility.
What is the best material for diy solar screens for windows?
UV-stable polyester or vinyl-coated fiberglass shade cloth is the usual choice because it resists fading and sagging. Choose a mesh rated for outdoor exposure.
Can I install window screens myself without special tools?
Yes. A saw, tape measure, staple gun and basic fasteners are enough for most frames. A pocket hole jig simplifies corner joints but is optional.
Conclusion
With the right mesh, careful measurements and a square frame, diy solar screens for windows can cut glare and heat for years. Mount them on the outside, keep them removable and check the fit before each season. For related projects, see 5 Best DIY Solar Screen Installation Kits Compared and 4 Best Solar Window Film DIY Kits for Home Windows (2026).
