Updated November 2026

An off-grid solar system sizing calculator in Excel lets you turn your daily electricity use into a panel, battery and inverter size you can actually buy. In this guide you will list your loads, build a simple spreadsheet, and work through the math that tells you how many watts of panels and how many amp-hours of battery you need. The same sheet works for a cabin, a workshop or a full home.

Step 1: List Every Load and Its Daily Runtime

Start with a table of every appliance you plan to run. For each one, enter the power draw in watts, the number of hours it runs per day, and the resulting watt-hours. Watt-hours per day is simply watts multiplied by hours. A 60 W laptop charger running 4 hours uses 240 Wh per day.

Shopping for one? See our guide: 6 Best DIY Solar Power System Kit Options for Off-Grid Homes (2026). For another angle, check out 3 Best Solar Power Generator Inverter Options for Home and Off-Grid Use.

Set up columns in Excel as follows: Appliance, Watts, Hours/Day, Wh/Day. Use a SUM formula at the bottom of the Wh/Day column to get your total daily energy use. Add a line for standby loads such as routers and inverter idle draw, which often run around 20 to 50 W continuously.

Step 2: Add Losses and a Safety Margin

Raw load totals undersize most systems. Add an efficiency factor to your total so the sheet accounts for wiring losses, charge controller losses and battery round-trip losses. A common approach is to divide your daily Wh by about 0.85 as a combined efficiency figure. Then multiply by 1.2 for a 20 percent reserve for cloudy days and appliance growth.

In a cell, the formula might look like: =SUM(D2:D20)/0.85*1.2. This gives you the adjusted daily energy target that your panels and batteries must supply.

Step 3: Size the Solar Array and Battery Bank

Panel sizing depends on peak sun hours at your location. Find the average peak sun hours for your site, which you can estimate from published solar resource maps for your region. Divide your adjusted daily Wh by peak sun hours to get the array wattage needed.

For example, 4,000 Wh per day divided by 4 peak sun hours gives 1,000 W of panels. Add another 15 to 25 percent to cover system losses from temperature, dirt and inverter conversion.

For batteries, multiply the adjusted daily Wh by the number of autonomy days you want, typically one to three. Divide by battery voltage to get amp-hours. Then divide by the depth of discharge your battery chemistry allows. A 4,000 Wh day with one day of autonomy on a 48 V bank at 50 percent usable depth needs about 4,000 / 48 / 0.5, or roughly 167 Ah.

Step 4: Select the Inverter and Charge Controller

The inverter must handle your largest simultaneous load, plus a surge margin for motors. Sum the wattage of appliances you may run at the same time, then choose an inverter rated above that figure with room for startup surges. Manufacturers specify surge ratings separately, so check both numbers.

The charge controller must handle the array’s maximum current. Divide array wattage by battery voltage, then multiply by about 1.25 as a safety factor. For a 1,000 W array on a 48 V bank, that is roughly 26 A, so a 30 A or larger controller fits.

Tools and Setup Checklist

  1. Microsoft Excel or a free spreadsheet program such as LibreOffice Calc
  2. A list of appliance nameplate wattages
  3. Peak sun hour data for your location
  4. Battery manufacturer depth-of-discharge specifications
  5. Panel and inverter datasheets

Sizing Summary Table

Result Formula Used Example Value
Adjusted daily energy Total Wh / 0.85 x 1.2 5,650 Wh
Array wattage Adjusted Wh / peak sun hours About 1,400 W
Battery capacity (Ah) Adjusted Wh / voltage / depth of discharge About 235 Ah at 48 V

Common Mistakes to Avoid

  • Using nameplate wattage without checking actual run time, which inflates or deflates totals.
  • Forgetting standby loads from inverters, chargers and network gear.
  • Sizing batteries in amp-hours without converting to watt-hours at system voltage.
  • Ignoring winter sun hours, which can be far below summer values.
  • Choosing an inverter sized only for continuous load and not for motor startup surges.

A clamp-style power meter helps you verify real appliance draw instead of relying on labels. Use it to replace estimates in Step 1 with measured values.

View on Amazon

A solar charge controller with a built-in display lets you compare actual array output to your spreadsheet predictions during the first months of operation.

View on Amazon

FAQ

Do I need special software to build an off-grid solar sizing calculator?

No. Any spreadsheet program with SUM and basic arithmetic formulas is enough. The calculations in this guide use only division, multiplication and addition.

How many days of battery autonomy should I plan for?

One to two days suits most grid-tied backup or sunny climates. Cloudy regions or critical loads such as medical equipment often justify three days or more. Consult a qualified installer before relying on a system for life-support equipment.

Can I use this method for a DC-only system?

Yes. Skip the inverter step and size the controller and battery directly to your DC loads, keeping the same efficiency and margin factors.

Conclusion

A sizing spreadsheet turns guesswork into a clear set of panel, battery and inverter numbers. Build it once, then update your load list whenever you add an appliance. For related walkthroughs, see Off-Grid Solar System Calculation: Step-by-Step Sizing for Beginners and Off Grid Solar System PDF: A Step-by-Step Sizing and Wiring Guide.

Claire Whitaker

About Claire Whitaker

Claire Whitaker is part of our editorial team and reviews and edits our DIY solar power systems guides, checking product details against manufacturer specifications and owner feedback.