Updated November 2026

An on grid and off-grid solar system PPT is a presentation that compares the two system types, shows how each one is sized and wired, and helps the audience pick the right design. This guide walks you through the slides to include, the numbers to put on them, and the mistakes that weaken a solar presentation. By the end, you will have a clear outline you can turn into a working deck.

Decide the Purpose and Audience First

Before you open any slide template, decide who will see the deck. A homeowner needs plain-language comparisons and a cost-of-ownership view, while a class or technical review needs component ratings and calculations. Keep the scope tight. One deck that compares on-grid and off-grid designs side by side works better than a sprawling file that tries to cover every inverter brand.

Shopping for one? See our guide: 6 Best DIY Solar Power System Kit Options for Off-Grid Homes (2026).

Build the Core Comparison Slides

The center of an on grid and off grid solar system PPT is a comparison of how each design works. Use one slide for the basic definition of each system, then a second slide for the differences that matter most. For a quick primer you can point viewers to What Is Meant by Off Grid Solar System? A Plain-English Answer for background, then keep your own slides focused on the trade-offs.

Factor On-grid system Off-grid system
Grid connection Tied to utility grid No utility connection
Battery bank Usually optional Required for storage
Key equipment Grid-tie inverter Battery inverter/charger, charge controller
Power during outage Shuts down without backup Continues from batteries

Add Sizing and Wiring Slides

Technical viewers will expect a sizing slide. Show the daily load in watt-hours, the peak load in watts, the number of panel-sun-hours at your site, and the resulting array size. For an off-grid design, add the battery bank size and days of autonomy. A simple worked example is more persuasive than a formula alone. For a deeper sizing walkthrough, see Planning an Off-Grid Solar System: 8 Steps to Size It Right.

Include one wiring diagram slide per system type. Label panels, combiner box, charge controller, inverter, battery bank, breakers and the grid connection point. The Wiring Diagram for Off-Grid Solar System: A Step-by-Step Guide is a useful reference when you draw your own version.

Checklist for Your Presentation

  1. Title slide with system type and site location
  2. Definition slide for each system
  3. Side-by-side comparison table
  4. Daily load and peak load calculation
  5. Panel array and battery sizing
  6. Inverter and charge controller selection
  7. Wiring diagram for each design
  8. Safety and code notes
  9. Summary and recommendation slide

Common Mistakes

  • Mixing units. Keep watts, watt-hours and amp-hours clearly labeled on every slide.
  • Showing a diagram without component ratings, which leaves the design unverifiable.
  • Forgetting battery depth of discharge when sizing an off-grid bank.
  • Presenting a single recommendation without stating the assumptions behind it.
  • Overloading slides with text. Put the numbers in a table and explain them out loud.

A clamp-on multimeter helps you verify voltages and currents you show on your wiring slides, and a solar panel meter helps you confirm array output before you present real measurements. For a sample layout, a small DIY solar kit can give you a physical reference when you explain the components.

View on Amazon

View on Amazon

FAQ

Can I combine on-grid and off-grid in one presentation?

Yes. A side-by-side comparison is one of the clearest ways to show viewers how the two designs differ. Keep each system’s slides separate so the audience can follow both.

How many slides should an on grid and off grid solar system PPT have?

Most solar presentations work well at 12 to 18 slides. Add more only if the audience needs detailed calculations or multiple site layouts.

Should I include prices in the deck?

Keep the focus on design, sizing and safety. If cost comparisons are needed, present them in a separate document and have a qualified installer or financial advisor review them.

Conclusion

A strong on grid and off-grid solar system PPT starts with a clear purpose, compares the two designs side by side, and backs every recommendation with sizing numbers and wiring diagrams. Follow the checklist above and keep each slide focused on one idea. Before any installation, have a licensed electrician or qualified solar professional review your design.

Ethan Brooks

About Ethan Brooks

Ethan Brooks is part of our editorial team and reviews and edits our DIY solar power systems guides, checking product details against manufacturer specifications and owner feedback.