Updated November 2026
Looking for the cheapest DIY solar panels? This list focuses on small, low-wattage modules sold for hobby builds, garden lights, USB charging and STEM kits. Each pick was chosen by comparing listing specifications (wattage, voltage, cell type, size and included wiring), brand reputation and patterns in owner feedback. Nothing here is based on our own testing.
Our top picks at a glance
- 1
TOP CHOICEBest overallMini Solar PV Cells 1W 5VView on Amazon - 2
TOP CHOICEBest for higher-voltage 12V buildsPolysilicon Epoxy Solar Panel Module 3.6W 12VView on Amazon - 3
TOP CHOICEBest for toys and garden lightsPolycrystalline Epoxy Solar Cells 0.45W 3VView on Amazon - 4
Best for USB charging projectsMini Solar Panel 5V 80mA Monocrystalline with TP4056 ModulesView on Amazon - 5
Best for bulk partsMicro Solar Panels with Wire 5V 200mA, 5-PackView on Amazon - 6
Best for light-duty outdoor lightingSolar Panel Module 5V 0.3W Polysilicon with WiresView on Amazon
Our Top Picks
| Product | Best for | Key feature |
|---|---|---|
| Mini Solar PV Cells 1W 5V | General DIY and STEM projects | 89.5mm square, 1W output |
| Polysilicon Epoxy Solar Panel 3.6W 12V | Compact 12V hobby setups | Epoxy-sealed 12V module |
| Polycrystalline Epoxy Solar Cells 0.45W | Toys and garden lights | Ten pieces, 3V output |
| Mini Solar Panel 5V 80mA with TP4056 | USB charging projects | Includes charger modules |
| Micro Solar Panels 5V 200mA, 5-pack | Bulk parts for classrooms | Five panels with wire |
| Solar Panel Module 5V 0.3W | Light-duty outdoor lighting | 68x36mm with wires |
Mini Solar PV Cells 1W 5V
Mini Solar PV Cells for DIY toys electronics, STEM projects, crafts lights Phone Charger kit models experiments; 89.5×89.5mm Small Solar Panels 1W 5V 200mA, 5-Pack Wire Clips Mini Solar Panel
Best for: General DIY and STEM projects
A good starting point for beginners building small electronics or education kits, since the 5V output works with common USB-style loads.
Pros
- Clear 5V, 200mA rating suits simple circuits
- Includes wire clips for quick connections
Cons
- Output is too small to charge phones directly
Polysilicon Epoxy Solar Panel Module 3.6W 12V
178*142mm Polysilicon epoxy Solar Panel Module for DIY solar chargers, low-power projects, hobby projects, compact 12V setups 12V Small Solar Panel 2Pcs, 3.6W 300mA Wire Clip Solar Cell Charger
Best for: Compact 12V hobby setups
Suits builders who want a 12V source for a small battery and a low-draw load, such as a trickle-charged sensor.
Pros
- Epoxy encapsulation helps protect cells from moisture
- Two-pack gives you spare capacity for series or parallel wiring
Cons
- At 300mA, a 12V battery will charge slowly
Polycrystalline Epoxy Solar Cells 0.45W 3V
Polycrystalline Epoxy Solar Cells Power Charger Kit for DIY toys, garden lights, flashlights, Low-power electronics; 55x60mm Small Solar Panels, 0.45W 3V 150mA,10Pcs Wire Clip Mini Solar Panel
Best for: Toys and garden lights
Fits hobbyists making solar-powered toys or path lights where a single small cell is enough.
Pros
- Ten pieces per pack covers multi-cell projects
- Small footprint fits tight enclosures
Cons
- 3V output needs a boost stage for most USB devices
Mini Solar Panel 5V 80mA Monocrystalline with TP4056 Modules
10pcs 56x56mm Mini Solar Panel 5V 80mA Monocrystalline Silicon with 2pc TP4056 Type-c USB Module for DIY Solar Projects, Camping, Electronics, Blackout Emergency EK8493
Best for: USB charging projects
Useful for emergency-light or camping builds where the TP4056 lithium charger board is already part of the plan.
Pros
- Pack includes two TP4056 Type-C charger modules
- Monocrystalline cells generally offer better efficiency per square inch
Cons
- 80mA is slow; a 2000mAh cell can take many hours of full sun
Micro Solar Panels with Wire 5V 200mA, 5-Pack
Best for: Bulk parts for classrooms
Works well for group builds or repeated experiments where you need several identical panels.
Pros
- Five panels allow series or parallel test arrays
- Pre-attached wires save soldering time
Cons
- Wire gauge is thin, so keep runs short
Solar Panel Module 5V 0.3W Polysilicon with Wires
2Pcs Solar Panel Module 5V 0.3W Polysilicon Mini Solar Cells with Wires for Solar Light & Outdoor Power Generation 68x36mm
Best for: Light-duty outdoor lighting
Suited to low-power LED fixtures and sensors that run only a few hours a night.
Pros
- Two-pack covers a pair of small outdoor lights
- Compact 68x36mm size is easy to mount
Cons
- 0.3W is too little for anything beyond LEDs
Buying Guide
Check wattage against your load
Multiply the device’s current draw by its runtime to get watt-hours, then compare that to the panel’s rated watts times about five peak sun hours. Under-sizing is the most common reason cheap panels disappoint.
FAQ
Can a small DIY solar panel charge a phone directly?
Most mini panels in this list produce only a few hundred milliamps at around 5V, which is enough to trickle-charge a small battery or power a low-draw device. Charging a phone usually works best when the panel feeds a regulator or charge controller module, and even then charging will be slow and depend heavily on sunlight.
Do I need a charge controller with these panels?
If the panel will charge a battery, a charge controller or charging module such as a TP4056-based board helps prevent overcharging and protects the battery from damage. For direct-drive projects, like powering a small LED or a fan that runs only in daylight, a controller is often unnecessary. Check the voltage and current of your load before deciding.
What is the difference between polycrystalline and monocrystalline cells?
Monocrystalline cells are usually more efficient per square inch, while polycrystalline cells are generally cheaper to produce and perform reasonably well in direct sun. For small hobby builds, the price difference often matters more than the efficiency gap. Either type will work for basic low-power projects if you size your load correctly.
How do I wire several small panels together?
Connecting panels in series raises the voltage, while connecting them in parallel raises the current, and the wire clips included with many packs make it easy to test both arrangements. Match panels of similar voltage and rating when combining them to avoid one weak panel dragging down the others. Keep track of total output so it stays within what your battery or controller can accept.
Will these panels work indoors or on cloudy days?
They will produce some power under indirect light, but output drops sharply in shade or on overcast days. Direct sunlight at a good angle gives the most usable energy, so position the panel facing the sun during the day. Plan for reduced output when designing any project that depends on steady power.
Are these panels weatherproof for outdoor use?
Epoxy-coated modules offer better protection against moisture and dust than bare cells, but none of the small panels here are fully sealed for harsh weather. For garden lights or camping setups, mounting the panel under a clear cover or in a sealed enclosure will extend its life. Keep wire connections insulated and protected from water.
Conclusion
If you want the lowest-cost option for simple STEM experiments, crafts or basic light-up projects, the small 0.45W and 0.3W modules are a good starting point. For builds that need more output, such as a USB charging setup or a compact 12V hobby system, the larger 3.6W panel or the 1W cells with a charging module will serve you better.
Before buying, match the panel’s voltage and current to your load and battery, and remember that real output depends on sun exposure. Choosing the right size for your project will get you more useful power than choosing the highest wattage you can find.
Related reading
- Top 7 DIY Solar Panel Installation Kit Options Compared for Beginners
- Solar Thermal Panels DIY: Build a Working Water Heater in 7 Steps
- Solar Panel for DIY: 5 Best Mini Panels for Small Projects (2026)
- Solar Panel Specifications for DIY Systems: What Each Number Means
- Solar Panel Pole Mount Diy: Build a Sturdy Pole Mount Step by Step
