Updated November 2026
To setup an off grid solar system, you need to size your daily energy use, choose matching panels, batteries, a charge controller and an inverter, then wire them in the correct order. Done right, the system will run your home or cabin without a utility connection. This guide walks through the process in the order most DIYers find works best.
Step 1: Calculate Your Daily Energy Use
Start by listing every appliance you plan to run, its wattage, and how many hours per day it operates. Multiply watts by hours to get watt-hours (Wh) per day, then add the totals. A refrigerator running 10 hours at an average of 100 watts uses about 1,000 Wh per day. Add roughly 20 percent to cover inverter losses and wiring inefficiency. For a fuller worked example, see How to Calculate Off-Grid Solar System Size: 7 Steps With Examples.
Shopping for one? See our guide: 6 Best DIY Solar Power System Kit Options for Off-Grid Homes (2026).
Step 2: Size the Battery Bank and Panels
Batteries should hold at least one to two days of your daily energy use, and you should only plan to draw about half of a lead-acid battery’s rated capacity to protect its lifespan. Divide your daily Wh by the usable depth of discharge to get the required battery capacity. Then divide your daily Wh by your local peak sun hours (often 4 to 5 in much of the US) and add a 20 to 30 percent margin to find the panel wattage you need. The Off-Grid Solar Power System Calculator: How to Size Your Setup Step-by-Step article shows this math in more detail.
Step 3: Match the Charge Controller and Inverter
Your charge controller must handle the panel array’s maximum current and the battery bank’s voltage. An MPPT controller is generally more efficient than PWM, especially when panel voltage is well above battery voltage. The inverter should be rated above your highest simultaneous load, with extra headroom for motor startup surges from pumps or compressors. Confirm that the inverter’s input voltage matches your battery bank, typically 12V, 24V or 48V.
Step 4: Wire the System in the Correct Order
Wiring order matters for safety. Follow these steps:
- Mount the panels and run their output cables to the charge controller, leaving the panel breaker off.
- Connect the battery bank to the charge controller, with a fuse or breaker within 7 inches of the battery positive terminal.
- Connect the inverter directly to the battery bank through its own fused disconnect.
- Connect your AC loads to the inverter output, through a sub-panel if you have one.
- Turn on the battery breaker first, then the panel breaker, and confirm the controller displays charging status.
Use wire sized for the current and run length, and ground the system per the National Electrical Code and local rules. If you are not comfortable with 48V DC or household AC wiring, consult a licensed electrician before energizing the system.
Common Mistakes to Avoid
- Undersizing batteries, which leads to frequent deep discharges and early failure.
- Connecting panels to the battery bank without a charge controller.
- Skipping overcurrent protection on the battery and panel circuits.
- Forgetting that panel output drops in winter and on cloudy days.
- Using undersized wire, which causes voltage drop and heat.
Recommended Gear
- Victron SmartSolar MPPT charge controller: a widely used MPPT controller that many DIY builders pair with lithium and lead-acid banks. View on Amazon
- Renogy DC-to-AC inverter: a common pure sine wave option for running household appliances from a battery bank. View on Amazon
- Renogy 100W monocrystalline solar panel: a popular entry-level panel for small DIY arrays and testing. View on Amazon
FAQ
Do I need a battery bank for an off grid solar system?
Yes. Without batteries, the system only produces power when the sun is shining, and nothing runs at night. The battery bank stores daytime energy for later use.
Can I use a grid-tie inverter in an off grid setup?
No. Grid-tie inverters need a utility connection to operate. Off grid systems need a battery-based inverter designed for standalone operation.
How long does it take to set up an off grid solar system?
A small system for a cabin can often be installed over a weekend by an experienced DIYer. Larger systems with more panels and batteries may take several weeks, especially if permits are required.
Conclusion
Setting up an off grid solar system comes down to accurate load sizing, properly matched components, and careful wiring in the right order. Work through each step with your own numbers, and double-check protection devices before energizing. For a complete build plan, browse How to Install Off Grid Solar Power System: A Step-by-Step Guide for Beginners.
